Not a Registered User?  Sign Up Here

Wolverine By Prince Manufacturing means

  • Globally sourced for great prices!!!
  • Products developed and tested in our unique R&D lab!!!
  • Manufactured to our specifications!!!
  • More products added regularly so check back often!!!
3000 PSI Rated with Cross Tubee

3000 PSI Rated with Cross Tube

  • 1.5" – 4” Bores
  • 4" – 48” Strokes
  • 100% tested
  • Cast steel end fittings
  • Hard chrome rod plating
  • SAE O-ring ports
  • Thread-in gland
  • Grease zerks included
3000 PSI Rated with Clevis

3000 PSI Rated with Clevis

  • 1.5" – 4” Bore Sizes
  • 4" – 48” Strokes
  • 100% tested
  • Cast steel end fittings
  • Hard chrome rod plating
  • SAE O-ring ports
  • Thread-in gland
  • Pins and clips Included
2500 PSI Rated with Tie-Rod Cylinder

Tie-Rod Cylinders

  • 1.5" - 4" Bore Sizes
  • 4" - 36" Strokes
  • 100% tested
  • Forged Clevises
  • Individually bagged and boxed
Wolverine 8 gpm Monoblock Valve

Monoblock Valves - 8gpm

  • 1-6 Spool monoblock
  • 3500 psi
  • #8 O-ring In/Out ports
  • #8 Work ports
  • Interchangable motor spool
  • Double acting
  • Load check
  • Low spool leakage (3 cc/min @ 1500 PSI)
  • Adjustable relief
  • Enclosed handle
  • Convertible to power beyond and closed center capability
Wolverine 14 gpm Monoblock Valve

Monoblock Valves - 14gpm

  • 1-6 Spool monoblock
  • 4000 psi 14 gpm
  • Low spool leakage (3 cc/min @ 1500 PSI)
  • #8 O-ring In/Out ports
  • #8 Work ports
  • Interchangable motor spool
  • Double acting
  • Load check
  • Adjustable relief
  • Enclosed handle
  • Convertible to power beyond and closed center capability
3000 PSI Rated with Cross Tube

3000 PSI Rated with Swivel Ball Ends

  • 1" – 3” Bores
  • 4" – 30” Strokes
  • 100% tested
  • Cast steel end fittings
  • Hard chrome rod plating
  • North American source seals
  • SAE O-ring ports
  • Thread-in gland
Hydraulic Hand Pump

Hydraulic Handpump

  • Up to 3500 psi working pressure
  • "SA" Series is Single Acting
  • "DA" Series have a built in Directional Control Valve
  • 1.5 and 2.1 Cubic Inch Per Cycle (One Up and One Down)
Hydraulic Log Splitter Valve

Log Splitter

  • Pressure release detent at end of retract stroke
  • Relief set at 2,250 psi
  • Max tank port pressure 500 psi
  • Max operating temperature 180° F
Hydraulic Flow Control Valve

Flow Control Valve

  • Standard 3-port allows for pressure compensated flow out of two ports.
  • Optional 2-port allows for pressure compensated flow out of one port.
  • Models available with adjustable ball spring relief.
  • Standard relief setting is 1500 psi.
  • Side Port Configuration
  • External seals on side lever spool prevents contamination from locking up spool
  • Rated for 3000 psi
  • 100% Tested
  • Weight is 8 lbs.
  • Cross-over for many popular models in the market
2 Spool Loader Valve - 12gpm

2 Spool Loader Valve - 12gpm

  • Nominal flow 12 gallons
  • Maximum flow 16 gallons
  • Maximum operation pressure 5000 psi
  • Maximum back pressure 725 psi
  • #8 O-ring In/Out ports
  • #8 Work ports
  • Low spool leakage (3 cc)
  • Load check
  • Adjustable relief
  • Power Beyond Available
Wolverine Ball Valve

Ball Valve

  • 1/4", 3/8", 1/2" sizes 7,250 psi (CWP)
  • 3/4", 1” sizes 4,500 psi (CWP)
  • Carbon Steel Body Zinc Plated
  • Hard Chrome Plated Steel Ball, POM Seat
  • 3 way valves are “L” Type
  • Operating Temp -20° to 175° F
  • Not Recommended for Steam, Gas, or Water Service
Woverine Inline Needle Valve

Inline Needle Valve

  • Carbon Steel Body
  • Designed to provide precision flow control
  • Operating temperature -20°F through 210°F
Inline Flow Control

Inline Flow Control

  • Carbon Steel Body
  • Designed to provide precision flow control & shut off in one flow direction & provide free flow in the opposite direction
  • Color bands allow fast return to a previous setting
  • Set screw locks valve to any setting
Hydraulic Motor

Hydraulic Motors

  • High-torque, low speed with gerotor
  • Instantly reversible (by reversing flow)
  • Cross-over for many popular models in the market
Inline Check Valve

Inline Check Valve

  • Carbon Steel Body
  • Designed to provide flow in one direction
  • Operating temperature -20° F through 210° F